module welded heat exchangers

Technical characteristics of the module welded heat exchangers:
  • Temperature : -40ºC up 170ºC
  • Pressure : max. 25 bar
  • Max. flow rate : 1000 m3/h
  • Connections : DN 40 - DN 200
  • Gaskets materials : NBR, EPDM, chloroprene, Viton, Butyl and other materials on request
  • Plates materials : W 1.4301,W 1.4401, W 1.4539, W 1.4571, SMO 254, Titan, Hasteloy

The plates and gaskets materials are selected using a specialized dimensioning software, according to the following parameters: fluid’s pH and chemical composition, fluid’s temperature operating temperatures and operating pressure.

Advantages of module welded heat exchangers:
  • High efficiency.
  • Intended for thermal media which condensate or vaporize during the process, the max. operating temperature being 170ºC.
  • Perfect seal of the primary circuit, the gaskets being replaced by welded beam.
  • The heat exchanger can be dismantled, inspected and cleaned due to the secondary circuit sealed by rubber gaskets.
  • Low fouling, due to high turbulence.
  • Resistance against corrosion.
  • Compact design, low installation room needed, low weight.
  • Modular system, with high flexibility, with the possibility of further changes of the number of plates.
  • Easy to clean, easy to install, easy to maintain.